Always on Connection for BSNL broadband modem (Only for Unlimited connection )

1) In Your Browser Window open //192.168.1.1
2) Fill username- admin and password- admin
3) Click on Advanced Setup.
4) Click on WAN.
5) Then Click On Edit of Service -pppoe_0_0_35_1 .
6) Select Connection Type- PPP over Ethernet (PPPoE)
select Service Category:UBR without PCR.
7) Select Enable Quality Of Service.
8) Click On Next.
9) In Connection Type Select -PPP over Ethernet (PPPoE).
10) In Encapsulation Mode select

LLC/SNAP-BRIDGING VC/MUX

click on next
11) Write your username and password.
in PPPoE Service Name: write dataone
Authentication Method: Auto
keep everthing else unselected.
click on next
12) Select Enable NAT , Enable Firewall and Enable WAN Service.
Service Name must be pppoe_0_0_35_1
click on next .
13) Click on Save.
14 Click on SAVE and Reboot.

Your Modem is Now configured.

1) Now Goto Control Panel ----Network Connections
2) Right click on your LAN connection and select properties.
3) Double Click on Internet Protocol (TCP/IP)
4)Select Obtain IP address automatically.
5) Select Obtain DNS server address automatically
6) Click on OK
Now you can access internet without dialing and on every PC on your LAN. On each PC IP address must be automatically selected.

Note:- Write Down your Ip address DNS address on a paper before as a backup ,if anything goes wrong.